ACL Staticide  

ACL Turbo Blast

Duster with the Biggest Blast to Clean Anything Fast

Turbo Blast Precision Duster is an economical, high-precision duster with a bigger blast for electronic cleaning applications. Its exceptional purity blast instantly cleans surfaces free of particulate contamination.


Turbo Blast Precision Duster is engineered to remove dirt, dust, oxide particles, and other airborne particles instantly, and can be used to facilitate the accelerated drying of solvent cleaners in a variety of applications.


It is suitable to use on printed circuit boards, medical devices, microcomputers, lab equipment, connectors and contacts, photo equipment, printers, and audio/video equipment.


  • Cleans hard-to-reach areas
  • Non-flammable
  • May be used on energized equipment
  • Non-corrosive and non-abrasive; will not scratch surfaces
  • Ultra-pure; filtered to 0.20 microns
  • Non-residual
  • Ozone safe: contains no CFC's or HCFC's
  • VOC: CARB/99%

View More Information   View Safety Data Sheet PDFPDF File
  ACL Staticide
 
 

7600 IPA Cleaning Wipes

Presaturated general purpose wipes

ACL Staticide® IPA Cleaning Wipes are a perfect choice for all general cleaning applications where removing contaminants are of concern.


Packaged in a convenient dispensing canister, ACL Staticide® IPA Cleaning Wipes are an essential work bench companion for the removal of solder pastes, inks, adhesives, and flux residues. Since these presaturated towels are safe for plastics and metals, it is suitable for the cleansing of printed circuit boards, hardline coax cables, both metal and fiber optic cable splices, and for restoring automatic and semi-automatic printer stencils back to their spotless state during and at the end of production runs.


Made with a blend of polyester and cellulose, these wipes provide a strong solvent-resistant material that is non-linting even at the perforated edge, making them an ideal choice for any controlled environment. Using exceptionally pure electronics-grade isopropyl alcohol, ACL Staticide® IPA Cleaning Wipes are excellent for maintaining the cleanliness of control systems and fiber optic connectors.


  • Evaporates quickly and leaves no residue
  • Flammable
  • 70% isopropyl alcohol and 30% deionized water
  • No cotton: 50/50 of polyester and cellulose for low-linting
  • Removes oil, grease, ionic and non-ionic residues
  • Safe to use on plastic and metal
  • Towel size: 5 x 8 inch perforated wipe

View Info Sheet PDFPDF File   View Safety Data Sheet PDFPDF File
     
View More Information    
  ACL Staticide
 
Find More Information at www.aclstaticide.com


Bivar  

UDD Series: Universal Card Guides

Nylon Card Guides with Conductive Grounding Clips and Static Dissipative Clips

Universal Snap-in Card Guides from Bivar are used in a wide range of applications for securing and aligning PCBs in both standard and unique subrack designs. The snap-in mounting pylons provide excellent panel retention and are designed to press-fit into sheet metal panels for quick and simple installation, requiring no additional tools.


The UDD Series Card Guides feature pre-installed conductive or static dissipative clips to provide either grounding or ESD protection, and are available in a complete range of lengths to meet the installation needs of nearly any application.


View Info Sheet PDF

View Technical Drawings PDF

   
   
   
Find More Information at www.bivar.com

 
Bivar
 
Bivar
 
Bivar
 

Brady  

Brady's New BMP® 61 Portable Label Printer

Brady’s New BMP®61 Portable Label Printer is designed for quick and efficient identification of wires, cables and components. With high performance materials that can handle the toughest industrial identification applications, this printer is your rugged and reliable partner in the field and dependable workhorse in the shop. It features multiple user interfaces, and a variety of ways to connect, manage and save your data. The BMP®61 printer also makes loading various material easy via its wide opening, which also allows for large bulk roll usage.

Simplify your process with touch screen convenience, along with a color screen display that is visible indoors and outdoors. The BMP®61 printer also features a 300 DPI (Dots Per Inch) print head that results in crisp and clear text output. The versatile BMP®61 printer's convenience and durability makes it a perfect choice for the shop or out in the field.

  • Die Cuts and Custom sizes available (up to 2" width)
  • Rugged drop-tested durability
  • Automatic label formatting with Ribbon Smart-Cell Technology
  • Dependable performance backed by a 2-year warranty
  • Interfaces with LabelMark 6.0 technology

View Info Sheet PDFPDF File   View More Information
 
Brady's new BMP 61 printer
 
 

BBP33 Label Printer

The BBP33 Label Maker is an industrial label printer that's simple, powerful and brilliantly fast. This label maker features full hassle-free operation with automatic label set-up, no calibration, no sensor adjustment and no label waste.

The BBP33 printer makes it easy for material changeovers. With foolproof "drop-in" ribbon and cartridge labels, all you have to do is drop-in the cartridge, lock and start typing. It really is that easy!

This printer meets your needs for a variety of label applications, including wire and panel ID, safety and arc flash labels, rating plates and circuit board labels, production line facility labels, pipe markers, 5S labels and more.

View More Information    
 
BBP33 Label Printer
 
 

Brady Portable Printers

Brady portable printers have all the greatest features for label printing on the go. Take a look at one of their most versatile models:

The BMP® 71 can print on more than 30 types of label materials - including PermaSleeve™ wire markers, indoor/outdoor vinyl, polyester die-cut labels, flag labels, self-laminating wire markers, raised panel labels, and more.

View More Information
 
Brady
 

Find More Information at www.bradyid.com


Henkel  

Henkel’s GAP PAD HC 5.0 Provides Excellent Thermal Management Performance for Applications with Increased Power Densities

GAP PAD HC 5.0 is the next generation of high compliance, very soft gap filling materials that allow for superb interfacing and wet out, even to rough surfaces and topographies, which ensures uniform material coverage across the component and heat sink for maximum performance. With high compliance materials, low thixotropic stress during assembly and through power and thermal cycling is important for minimizing pressure and potential damage to solder interconnects.

Compared to previous-generation materials, GAP PAD HC 5.0 offers better handling, an enhanced dielectric constant, improved volume resistivity and better thermal impedance performance. Manufactured with a natural tack on both sides, GAP PAD HC 5.0 contains no thermally-impeding adhesive layers and is available in a range of thickness from 0.508 mm up to 3.175 mm. Reinforced with fiberglass for shear and tear prevention, the new GAP PAD HC 5.0 is also highly durable.

  • Thermal Conductivity: 5.0 W/m-K
  • Silicone-based, non-electrically conductive, highly conformable
  • Available in various thicknesses and custom part sizes
  • Low hardness and modulus

View Technical Data Sheet PDFPDF File   View More Information
  Henkel
 
 

Recycle Loctite® Product Packaging

Go Zero Waste With Henkel's Adhesive Recycling Program

Henkel is the first adhesive manufacturer to provide an affordable, green solution for its anaerobic adhesives packaging, allowing customers to meet sustainability goals and recycle items that were previously non-recyclable.

The Adhesive Recycling Program for anaerobic packaging is made possible through our innovative partnership with TerraCycle®. Through this program, your business can launch or meet your company-wide sustainability goals while still leveraging the Loctite® products you know and trust.

  • Increased Sustainability – Our Adhesive Recycling Program will enhance your company-wide sustainability goals
  • Recycling Made Easier – We will provide you with durable collection boxes and convenient return shipping
  • Customer Support – TerraCycle® customer support is available weekdays to answer questions about the recycling program, and Henkel representatives will help with your box order

View Info Sheet PDFPDF File   View FAQs Sheet PDFPDF File
     
View More Information    
  Henkel
 
 

Recently Improved: Loctite® 577™ Thread Sealant

Loctite® 577™ is a medium-strength, general purpose thread sealant designed for the locking and sealing of metal pipes and fittings as well as other threaded assemblies. The product provides an instant, low-pressure seal for metal pipes and fittings. It will not creep, shrink or shred. Suitable for fast application at low temperatures. Cures on lightly contaminated surfaces and does not require a primer on inactive metals. It has excellent chemical and thermal resistance and offers less migration of liquid product after application to the part.

  • Suitable for all metal types
  • Instant low pressure seal
  • Excellent chemical resistance
  • Cures on active and inactive metals

View Technical Data Sheet PDFPDF File   View Demo Video
     
View More Information    
  Henkel
 
 

Recently Improved: Loctite® 518™ Gasket Sealant

Loctite® 518™ Gasket Sealant is a medium-strength gasket sealant which cures when confined in the absence of air between close-fitting metal surfaces. It is an anaerobic gasketing material designed for use on rigid iron, aluminum, and steel flanged mating surfaces. Seals up to 300°F, fills gaps up to 0.05" and forms a flexible, chemical-resistant seal that will not tear or decay. Parts disassemble easily, even after extended service.

Typical applications include sealing close-fitting joints between rigid metal faces and flanges. It is also used as a form-in-place gasket on rigid flanged connections, e.g. transmissions, gear box, and engine casings.

  • Reduces inventory costs – no need for large inventory of cut gaskets
  • Resists high pressure when fully cured
  • Eliminates manual assembly of conventional gaskets
  • For active and inactive rigid metal flanges
  • Adapts to flange surface irregularities and gaps up to 0.25 mm
  • Seals instantly against low pressure

View Technical Data Sheet PDFPDF File   View More Information
  Henkel
 
 

Loctite® 4090™ - Patented Hybrid Adhesive

This innovative hybrid adhesive combines the bond strength and speed needed to solve your design and assembly challenges. With the speed of an instant adhesive and the strength of a structural adhesive, Loctite® 4090™ delivers both performance and versatility.

Loctite® 4090™ delivers high quality performance in extreme environments and challenging conditions. This hybrid powerhouse provides the necessary versatility to solve most every design, assembly and repair challenge.

  • Strong – strength of a structural adhesive
  • Fast – speed of an instant adhesive
  • High impact and vibration resistance – 3x more than instant adhesives
  • Temperature resistance to 300°F
  • Fills gaps up to 0.2"
  • Bonds multiple substrates – metals, plastics, rubbers, etc.

View Info Sheet PDFPDF File   View Demo Video
     
View More Information    
  Henkel
 

Hardware Specialty is proud to be the Certified Loctite® Equipment Showroom in New England, Ohio and Wisconsin.

Find More Information at www.henkel.com


 

Heyco®-Tite Hybrid Liquid Tight Cordgrips

PG Hubs provide the durability of a nickel-plated brass enclosure with drastically lower installed cost and more secure wire gripping with nylon finger design.


View Info Sheet PDF

  Heyco-Tite Hybrid Liquid Tight Cordgrips
 
 

Heyco® Liquid Tight Threaded Plugs

Liquid Tight with Integral Sealing Ring ensures a superior seal at mounting hole location, every time.


View Info Sheet PDF

  Heyco Liquid Tight Threaded Plugs


Find More Information at www.heyco.com


Hutchinson Aerospace & Industry Inc.  

NEW 44000 Series Tube Mounts

Hutchinson 44000 Series Tube Mounts are rugged, low profile, high capacity mounts for vibration and shock protection. Recommended for use with off-road equipment, trucks, construction equipment and power generation equipment.


View Info Sheet PDF

View More Information

  Hutchinson Aerospace & Industry Inc.
 

Find More Information at www.hutchinsonai.com


Kato  

KATO Linear Torque Arm

KATO's Linear Torque Arm is a torque reaction arm, designed to install Tangless or Tanged KATO CoilThread inserts using any KATO electric installation tool. Add the optional Air Tool Kit, and KATO's Linear Torque Arm will work seemlessly with KATO's pneumatic installation tools.


KATO's Linear Torque Arm offers an unprecedented smoothness of linear and rotational movements as it absorbs the torque reaction inherent with power installation tools. KATO's Linear Torque Arm delivers ultra smooth vertical, horizontal, and rotational motion, provides ergonomic support for the operator, and reduces operator fatigue. The fluid movement of KATO's Linear Torque Arm increases precision and production for a variety of applications.


  • Keeps the installation tool perpendicular to the work piece
  • Reduces Repetitive Motion Injury and Carpal Tunnel Syndrome while boosting production
  • Prevents cross threading and side load, prolonging the life of installation mandrels
  • Adjustable counter balance provides exceptionally smooth vertical movement
  • Maneuvers smoothly as the arm absorbs torque reactions from electric and pneumatic tools

View Info Sheet PDFPDF File   View More Information
 
Kato
 
 

The New KATO Inserts & Tools Design Guide

The KATO CoilThread® Inserts & Tools Design Guide is now available in PDF format! The new KATO Part Numbering System for tooling was designed to make identifying and ordering KATO installation and removal tools quick and easy.


View KATO CoilThread® Inserts & Tools Design Guide

 
 
Kato
 

Find More Information at www.katonet.com


Metcal  

Quant 3D Printers: Q150 Compact Desktop 3D Printer

The Q150 is a mini 3D printer with an enclosed housing door. Despite its compact size, the Q150 is big on features, ease of use and quality printed objects.


  • Ready to print within minutes
  • Extremely price competitive
  • Best entry-level printer in its class
  • High quality plastic filaments
  • Ideal for education / home / office

View Info Sheet PDF

View More Information

  Metcal
 
 

Quant 3D Printers: Q200 Compact Desktop 3D Printer

Whether you are a hobbyist, an educator, an engineer, an inventor or a manufacturer, unleash your creativity and turn your ideas and designs into professional 3D models, all at the touch of a button!


  • Award winning 3D printer
  • Best in class auto-level platform
  • Prosumer grade quality print
  • Easy to use interface
  • Top rated magazine reviews

View Info Sheet PDF

View More Information

  Metcal
 

Find More Information at www.metcal.com


 

Semi-Automatic Ferrule Installation Tool – CP-881

Delivers quick three-step process (wire stripping, ferrule placement, and ferrule crimping) to reduce the average manual processing cycle time.

The Panduit semi-automatic ferrule installation tool (CP-881) provides a reliable wire processing solution for wire harness and control panel manufacturing in which high volumes of #20 – 14 AWG ferrules are installed. Ferrules are increasingly being specified in control panels and industrial machines. Lightweight and easy to carry from one workstation to another, the CP-881 provides a high quality termination solution with job site flexibility, contributing to the overall product reliability and productivity.


View Info Sheet PDF

View More Information

  Semi-Automatic Ferrule Installation Tool – CP-881
 
 

PANELMAX ™ DIN Rail Wiring Duct: Achieve Panel Space Optimization

PANDUIT ® PANELMAX ™ DIN Rail Wiring Duct is an innovative wire management solution that maximizes space utilization within industrial enclosures, for flexibility in panel layout and reduced material and installation costs.


View Info Sheet PDF

View More Information

 
  Panduit DIN Rail Wiring Duct
 
Find More Information at www.panduit.com


Richco  

New NM Series - MS25281 Cable Clamps

The NM series cable clamps are qualified to SAE AS25281, and are designed for heavy-duty cable management applications. The NM series also provides stability where vibration is an issue. The aluminum eyelet in the mounting hole is used to spread the load for the screwed fastening device and provides a higher tensile strength. The NM series is available in 26 sizes for bundle diameters ranging from 3/16” to 1¾”. The NM series is RoHS compliant and its cage code is 6B3V9. The NM series is approved for listing on QPL AS23190.
 
View Info Sheet PDF
  Richco
 
Find More Information at www.richco-inc.com


SCS  

MagSnap® 360™ Dual-Wire Metal Expansion Wrist Strap

Creates a superior electrical connection to eliminate intermittent failures in traditional snap connections using springs, extend lifespan of the wrist strap, and maintain a 1-5 pound perpendicular breakaway force to prevent accidental disconnects. Designed to promote comfort, freedom of motion, and reduce strain on the operator's wrist.


  • Magnetic Connection Between Wristband and Coil Cord
  • Dual Wire Metal Expansion Wristband
  • Medical Grade Series Stainless Steel Backplate and Links
  • Made in the United States of America

View More Information

 
  SCS
 

stat-A-REST™ Foot Grounders

The stat-A-REST™ Foot Grounders meet the ANSI/ESD S20.20 < 100 volt peak body voltage requirement for use as an ESD footwear component in personnel grounding footwear / flooring system. The stat-A-REST™ Foot Grounders will not leave marks on floors (or operator’s shoes); reducing maintenance costs of touching up on floors.


  • Full Coverage Foot Grounder with Contact Points on Sole and Heel Area
  • Tear and Chemical Resistant Thermoplastic Elastomer (TPE) Material
  • Non-Marring Material
  • Made in the United States of America

View More Information

 
  SCS
 

SCS Introduces the New Static Dissipative Rubber Mats and Runners 6800 Series

SCS is pleased to announce the launch of their new SCS Static Dissipative Rubber Mats and Runners 6800 Series. Outstanding electricals, combined with very competitive pricing will enable SCS to provide solid static control performance and a reasonable price.


View Info Sheet PDF

 
  SCS
 

Find More Information at www.staticcontrol.descoindustries.com


 

Distinctive Wing Knob-Style Captive Screw Provides Tool-Free Access and Color Differentiation

Southco's new 4C Wing Knob Captive Screw enables quick-access fastening and features an over-molded, distinctively contoured and attractive wing-style head design that can be used to designate access through an array of standard and custom color options. Press-in, flare-in and Surface Mount Technology (SMT) options provide versatility for fastening and unfastening by hand or tool when mounting doors, panels and other hardware components in applications where space is limited.

  • Distinctively contoured wing-style head design for quick access
  • "Prism" colored fasteners to differentiate access points
  • Press-in, flare-in and SMT options
  • Standard Phillips, Torx® and combination recesses available

View More Information
  Southco
 
 

Southco Introduces New Heavy Duty Display Mounting Solutions

Southco continues to widen its AV Display Mount offering with the heavy duty D40 Series, which includes a Tilt and Swivel Mount (K Series), a Tilt, Swivel and Single Arm (A Series) and a Dual Extension Arm (D Series). The AV-D40 Series provides robust operation and holds larger, heavier displays securely in place during touchscreen operation, under vibration, and when devices are mounted on uneven or unbalanced surfaces.

  • Extended length, dual swing arm assembly maximizes reach
  • VESA compliant and simple wall mount installation
  • Integrated wire management channels for power cables
  • Validated for 20k cycles of operation without maintenance or adjustment
  • Smooth exterior with minimal joints for ease of cleaning

View More Information
  Southco
 
 

New Stainless Steel Surface Mount Hinge Designed For Corrosive Environments

Southco’s new stainless steel N6 Surface Mount Hinge features an updated design that provides superior durability in corrosive environments. The stainless steel N6 Hinge is available in six sizes and with optional covers, offering maximum design flexibility. Available in 304 or 316 stainless steel materials with passivated or high gloss finishes, the N6 Hinge provides a refined look without sacrificing functionality.

  • Designed for indoor and outdoor use
  • High gloss finish option complements application styling
  • Available in a variety of hinge leaf configurations and sizes
  • Economical stamped hinges are available in 304 SS and 316 SS

View More Information
  Southco
 
 

Southco Introduces Next Generation Display Mounting Solutions

Southco has expanded its AV Display Mount offering with the AV-D32 Series, which includes a next generation Tilt and Swivel Mount (K Series), a Tilt, Swivel and Single Swing Arm (A Series), and a Tilt, Swivel and Dual Swing Arm (A Series). AV-D32 Series Display Mounts offer the same integrated Positioning Technology and validated cycle life as Southco’s first generation mounts in an economical, streamlined package.

  • Wall mounted or tabletop mounted base options available
  • Integrated wire management channels for power cables
  • Smooth exterior with minimal joints for ease of cleaning
  • Resists vibration and holds display securely in place during operation
  • Validated for 20k cycles of operation without maintenance or adjustment

View More Information
  Southco
Find More Information at www.southco.com


Stanley  

NeoBolt® Lockbolt System

High-strength - Vibration resistant - Eco-friendly

NeoBolt® is a non-breakstem steel lockbolt fastening system designed for use in heavy-duty structural applications. The pin doesn’t break when the fastener is installed. The two-piece fasteners, designed by STANLEY Engineered Fastening, feature unique design characteristics such as annular locking grooves for unmatched vibration resistance, fatigue performance and avoidance of loosening by unscrewing.


The NeoBolt® program comprises a wide range of fastener diameters and lengths. Existing, well-proven Avdel® placing tools are adapted specifically to suit the full range of NeoBolt® sizes.


View Info Sheet PDF

View More Information

  Stanley
 
 

Avdel Infalok® Lockbolts

Avdel® has developed the new range Infalok® large diameter lockbolts. They are heavy duty, two-piece fasteners designed to provide a high strength and secure assembly. Quick and simple to place, Infalok® large diameter lockbolts provide a long lasting, vibration proof joint.

They are ideal for demanding assembly applications where welding is not practical or where conventional bolts struggle to provide a guaranteed and retained clamp load quickly and consistently.


View Info Sheet PDF

View More Information

 
  Avdel
 
 

734 AV™ Tool Series

Avdel’s 734 range of robust and durable installation tools designed for high speed installation of larger diameter lockbolts is ideal for any busy production line. Large diameter Infalok® and Avbolt® fasteners can be placed securely in seconds with this new range of tough tools and pumps, designed for a long working life in extreme conditions.


View Info Sheet PDF

View More Information

 
Avdel
 

Find More Information at www.stanleyengineeredfastening.com


TE Connectivity  

New Raychem EPS Repair Manual

A how-to repair guide for repairing a sealed harness using the TE Raychem sealed harness components

The new General Harness Repair Manual covers procedures for repairing wiring harnesses manufactured with TE’s Raychem harness system components. All replacement components are chosen to meet the adhesive peel strength, mechanical strength, environmental protection, and fluid resistance requirements of the wire harness systems as defined by customer specifications and TE technical specifications.


View Info Sheet PDF

 
  TE Connectivity
 
 
 

Cold Applied Splice

The cold applied splice product line is designed as a single component in-line splice to provide high environmental protection to seal the termination from moisture and provide electrical isolation.


View Info Sheet PDF

 
  TE Connectivity
 
 
 

Side Entry Bushing

Pre-coiled side entry reusable silicone bushing designed to be used in high temperature applications where tape or other molded grommets are used.


View Info Sheet PDF

 
  TE Connectivity
 
 
 

Find More Information at www.te.com


 

Knurled Press-Fit Plungers

Vlier's newly designed Knurled Press-Fit Plunger and Ball Plunger offer greater flexibility than ever before for manufacturing and product design, without the use of threads, locking elements and bonding agents for a secure fit. The beauty of their designs is in their simplicity and function, giving designers more options than ever before.


View Info Sheet PDF

View More Information

   
  Vlier
 
Find More Information at www.vlier.com



 

Copyright ©2016 Hardware Specialty Co., Inc. All rights reserved.